SEC-02 / Frameworks

EU AI Act and the Machinery Regulation: what machine builders and plants need to know

From 20 January 2027 the Machinery Regulation replaces the Machinery Directive and explicitly covers machine learning in safety functions. Since the July 2026 AI Omnibus, AI safety requirements for machinery will be set inside the Machinery Regulation rather than applied separately through the AI Act.

7 min read Updated OT engineersMachine buildersPlant managersEHS leaders

Key takeaways

  • Machinery Regulation (EU) 2023/1230 applies from 20 January 2027 and replaces Directive 2006/42/EC.
  • Safety components and machinery with self-evolving, machine-learning behavior that ensures safety functions need third-party conformity assessment. Self-declaration alone is no longer an option for them.
  • The AI Omnibus (Regulation (EU) 2026/1744) moved machinery to Section B of the AI Act's Annex I. AI requirements will be added to the Machinery Regulation by delegated act, applying by 2 August 2028.
  • AI that only optimizes performance or does non-safety quality inspection is not a safety component under the amended AI Act.
  • A plant that adds AI to an existing machine can become its manufacturer if the change is a substantial modification.

Two EU laws meet at the machine: the Machinery Regulation (EU) 2023/1230, which governs whether a machine is safe to place on the market, and the AI Act (Regulation (EU) 2024/1689), which governs AI systems. Until mid-2026 the plan was for both to apply in parallel to AI safety components in machinery. The AI Omnibus (Regulation (EU) 2026/1744), in force since 27 July 2026, changed that. This page explains the current position as of November 2026, for OEMs and machine builders and for plant engineers who integrate AI into machines.

The two regulations in one view

Machinery Regulation (EU) 2023/1230 AI Act (EU) 2024/1689
What it regulates Machinery and related products placed on the EU market AI systems and general-purpose AI models
Applies from 20 January 2027 (replaces Directive 2006/42/EC) In stages since 2025; high-risk dates moved by the Omnibus
Who carries it Manufacturer of the machine (or whoever substantially modifies it) Provider of the AI system; deployers have lighter duties
AI-specific content Machine learning in safety functions; control systems with self-evolving behavior Full high-risk regime for listed uses and products
After the Omnibus Will receive AI requirements by delegated act, applying by 2 August 2028 Machinery moved to Annex I, Section B; only a narrow set of provisions applies directly

What the Machinery Regulation says about AI

The Regulation was written with machine learning in mind. Three parts matter.

1. Third-party assessment for learning safety functions

Annex I Part A lists high-risk categories that need a notified body. It includes:

  • Safety components with fully or partially self-evolving behavior using machine learning approaches that ensure safety functions.
  • Machinery with embedded systems of that kind, where those systems have not been placed on the market separately.

For Part A categories, the manufacturer must use a notified body route (EU type-examination plus internal production control, full quality assurance, or unit verification). Self-assessment alone is not available. Software that cannot learn or evolve is not in this category.

2. Essential health and safety requirements for autonomy and learning

Annex III of the Regulation, the essential health and safety requirements, includes requirements for control systems with self-evolving behavior or designed to operate with varying levels of autonomy. In summary, the machine must not act beyond its defined task and movement space, data on safety-related decisions must be recorded, and it must be possible to correct the machine to maintain its inherent safety. Modifications to settings or rules that could lead to hazardous situations, including during learning, must be prevented.

3. Cybersecurity of control systems

The Regulation adds requirements on protection against corruption and on the safety and reliability of control systems, including resistance to malicious attempts to create hazardous situations. That is where OT security and machine safety now overlap. For machines with network connections, see also the Cyber Resilience Act and IEC 62443.

What the AI Omnibus changed

The Omnibus amended the AI Act and the Machinery Regulation together:

  • Machinery moved to Annex I, Section B of the AI Act. For Section B legislation, the AI Act's high-risk requirements are not applied directly. They are written into the sectoral law instead.
  • New empowerment in the Machinery Regulation. The Commission must adopt delegated acts amending the Machinery Regulation's Annex III to add health and safety requirements for high-risk AI systems that are safety components of machinery. Those requirements must reflect the AI Act's high-risk requirements, as well as its provisions on quality management systems, automatically generated logs, post-market monitoring and serious incident reporting. The delegated acts are to apply by 2 August 2028.
  • Bridge for standards. Until harmonized standards or common specifications are referenced for this purpose under the Machinery Regulation, AI systems that comply with harmonized standards or common specifications under the AI Act are presumed to conform with the relevant machinery requirements.
  • Narrower safety component definition in the AI Act. AI used solely for non-safety aspects such as user assistance, performance optimization, efficiency, automation or non-safety quality control is not a safety component. AI whose failure or malfunction would endanger health and safety is.

The practical effect: one conformity assessment for the machine, under the Machinery Regulation, covering the AI safety function. The requirements are reorganized, not removed. Their final shape depends on the delegated act, which had not been adopted when this page was last checked (November 2026).

Watch out: The AI Act still applies to machinery in other ways. Prohibited practices, transparency duties and AI literacy are horizontal. A machine that recognizes operators' emotions is still banned. And if the same AI is used to evaluate individual workers, it can be high-risk under the AI Act's employment category regardless of the machine route. See the EU AI Act overview.

Sorting your AI: is it a safety function?

 Does the AI perform or support a safety function?
   (prevent or mitigate risk to health/safety)
        |                         |
       NO                        YES
        |                         |
 Performance, energy,      Does it learn or self-evolve
 non-safety QC, assist     in service (ML safety logic)?
        |                    |                 |
 Not a safety component.    YES               NO
 Normal machinery EHSR;     |                 |
 AI Act horizontal rules.   Annex I Part A:   Standard safety
                            notified body.    control design
                            AI requirements   (functional safety
                            via delegated     standards); normal
                            act by Aug 2028.  conformity route.

Examples:

AI function on a machine Likely classification
Vision inspection for cosmetic defects on a packaging line Not a safety component
Energy or cycle-time optimization on a press Not a safety component
AI-based person detection that slows or stops a robot or AGV Safety function. If ML-based and self-evolving, Annex I Part A
AI vision replacing a light curtain or area scanner Safety function; high scrutiny
Predictive maintenance advising planners Not a safety component, unless it directly controls a safety function

For OEMs and machine builders

  • Map every AI function in your product line and record whether it performs a safety function.
  • Decide what learns in the field. A model frozen at release is very different from one that updates on site. Self-evolving behavior in a safety function pulls you into notified body assessment.
  • Engage a notified body early for any Part A machine. Capacity is limited and the Regulation applies from 20 January 2027.
  • Build logging and update control into the design: version tracking for safety software, records of safety-related decisions, and a way to roll back.
  • Prepare for AI requirements by August 2028. Expect them to mirror the AI Act: risk management, data governance, documentation, record-keeping, transparency, human oversight, accuracy and robustness, and post-market monitoring.
  • Write clear instructions that state the intended purpose and limits of AI functions, so integrators and plants do not unknowingly change them.

For plants integrating AI into machines

Most plants are users of machinery, not manufacturers. That changes when you modify machines.

  • Substantial modification. Under the Regulation, a modification by physical or digital means that the original manufacturer did not foresee, and that affects safety by creating a new hazard or increasing an existing risk, makes the person carrying it out responsible as manufacturer for the modified part. Adding AI person detection to replace a guard is a textbook candidate. Adding a camera that only grades product usually is not.
  • Assemblies. Linking machines into a line with a new AI-based control layer can create an assembly of machinery with its own conformity duties.
  • Retrofit through MOC. Every AI addition to a machine goes through management of change, with a risk assessment that considers failure of the AI and of the network around it.
  • Employer duties still apply. EU workplace rules on the safe use of work equipment continue to sit with you as the employer, whatever the machine route.
  • Segment it. An AI vision PC or edge box connected to a safety PLC is a new conduit. Treat it under your AI in OT networks controls and decide where inference runs, as discussed in edge vs cloud AI.

Plant-floor reality: The integrator says the new AI zone monitoring "is just a smarter scanner". Ask three questions before the FAT: does it learn after commissioning, what happens when the camera is dirty or the network drops, and who signs the declaration of conformity for the modified cell. If nobody can answer the third, it is probably you.

Effort and cost

Situation Typical effort
Plant inventory of AI on machines, with classification 3 to 10 person-days
Substantial modification assessment for one retrofit 2 to 5 days with your safety engineer
OEM: first Part A machine through a notified body A multi-month project; budget engineering time and notified body fees
OEM: preparing documentation for future AI requirements Ongoing; build into the product development process

Common mistakes

  • Assuming the AI Act no longer matters for machines. It still applies horizontally, and its requirements will arrive through the Machinery Regulation.
  • Calling a safety function "assistance". If its failure would endanger people, it is a safety component, whatever the brochure says.
  • Letting models update in the field without control. A self-evolving safety function changes your conformity route.
  • Retrofitting without a conformity decision. If you cannot show why a modification was not substantial, you may be the manufacturer by default.
  • Ignoring cybersecurity. The Regulation expects control systems to resist malicious corruption.

Monday-morning checklist

  • List every machine with AI functions, installed and on order.
  • Mark each one as safety function or not, and as learning in the field or frozen.
  • For machines arriving after 20 January 2027, ask OEMs which conformity route they used.
  • Put every planned AI retrofit through MOC with a substantial modification assessment.
  • Add AI-specific questions to purchase specifications using the OT AI vendor security questionnaire.
  • Track the Commission's delegated act for machinery AI requirements.

Note: This is general information, not legal advice. Confirm classifications and conformity routes with counsel and your notified body.

Sources and further reading

  1. Regulation (EU) 2023/1230 on machinery, EUR-Lex
  2. Regulation (EU) 2026/1744 (Digital Omnibus on AI), EUR-Lex
  3. Regulation (EU) 2023/1230 on machinery (EU-OSHA)
  4. AI Act: regulatory framework and application timeline (European Commission)

This guide is general information for manufacturers, not legal advice. Confirm regulatory obligations with qualified counsel.

FAQ

Frequently asked questions

When does the EU Machinery Regulation 2023/1230 apply?

The Machinery Regulation entered into force in July 2023 and applies from 20 January 2027, when it replaces the Machinery Directive 2006/42/EC. A few provisions, such as those on notified bodies, applied earlier. Machines placed on the EU market from 20 January 2027 must meet the Regulation's essential health and safety requirements and conformity assessment rules.

Does an AI safety function on a machine need a notified body?

Yes, if it involves fully or partially self-evolving behavior using machine learning that ensures safety functions. Those safety components, and machinery with such embedded systems, are in Annex I Part A of the Machinery Regulation, which requires third-party conformity assessment. Fixed, non-learning software is outside that category.

Do machine builders need a separate AI Act conformity assessment?

Since the AI Omnibus took effect on 27 July 2026, machinery sits in Section B of the AI Act's Annex I. The Commission must add AI requirements to the Machinery Regulation by delegated act, applying by 2 August 2028. The intent is one conformity assessment under the Machinery Regulation, not two parallel ones.

If we add AI vision to an old machine, are we now the manufacturer?

Possibly. Under the Machinery Regulation, a person who substantially modifies a machine takes on the manufacturer's obligations for the affected part. A modification not foreseen by the original manufacturer that creates a new hazard or increases a risk, for example an AI-based guarding or speed function, is the typical trigger. Run a risk assessment and document the decision.

Related guides

Know where your plants stand

Score your AI governance, OT security and data readiness in about 10 minutes each. Results stay in your browser.